ÃÛÌÒÊÓƵ

Doctoral Dissertations

• Sharan C. Kallolimath, “Development of Drop/Shock Test in Microelectronics and Impact Analysis for Uniform Board Response,” Doctoral Dissertation, ÃÛÌÒÊÓƵ University, December 2016
  
• Xingqi Zhang, “A Study on Hygroscopic Swelling Characterization” Doctoral Dissertation, ÃÛÌÒÊÓƵ University, May 2008.

Master Theses

• Kabir, MD Amanullah, “Augmented Reality Technology in Design of Mechanisms,” M.S. Thesis, Exp. January 2019
• Mohamed Nizamuddin Imtrani Shaik, “Study on Dynamic Response of Impact to a Drop Test Board,” M.S. Thesis, Exp. August 2018
• Ahmed, Hossain. “Study of Dynamic Response of Grass-Like Crops Using High-Speed Digital Image,” Master Thesis, ÃÛÌÒÊÓƵ University, May 2017
• Rahman, Rezaur. “Numerical Analysis of Electrical Characterization in a Square Channel with EHD Gas Pump,” Master Thesis, ÃÛÌÒÊÓƵ University, December 2016
• Khan, Adeel, “Injection Mold Design Optimization Based on Runner System Design and Operating Process Conditions through Simulation,” Master Thesis, ÃÛÌÒÊÓƵ University, December 2015
• Mehrdad Mohsenizadeh, “Kinematic Analysis and Simulation of Theo Jansen Mechanisms,” Master Thesis, ÃÛÌÒÊÓƵ University, December 2015
• Godalwar, Pranav R. R, “Design and Analysis of a Force Plate Measuring Root System Stability of Crops,” Master Thesis, ÃÛÌÒÊÓƵ University, May 2015
• Jahan, M.D. Fathami, “Analysis and Simulation of Suspension of Off-Road Vehicles,” Master Thesis, ÃÛÌÒÊÓƵ University, August 2013
• Islam, Md Aminul, “Development of Mobile Apps for Learning System Dynamics,” December 2013 (Co-Supervisor)
• Dahval Desai, “Optimization Design of an Axial-Flow Fan Used in Local Ventilation in Mining Industry,” Master Thesis, ÃÛÌÒÊÓƵ University, May 2012
• Milind Ranade, “Development of Web-Based Graphical User Interface for the Dynamic System of the Suspension in Vehicles,” Master Thesis, ÃÛÌÒÊÓƵ University, August 2011
• Mihirkumar Sanghadia, “Anthropometric Robotic Arm With DC Motor Control System Analysis,” Master Thesis, ÃÛÌÒÊÓƵ University, August 2011
• C. Pushpa, “Experimental Study of Dynamic Performance of Living Crops,” Master Thesis, ÃÛÌÒÊÓƵ University, May 2011
• Sushil Doranga, “Study of the Dynamic Damping Effect of Living Crops,” Master Thesis, ÃÛÌÒÊÓƵ University, August 2009
• Mihirkumar Patel, “Study of Temperature Dependency of Bulk Modulus for Molding Compound by Transit Creep Experiments,” Master Thesis, ÃÛÌÒÊÓƵ University, December 2007
• Ratna P. Niraula, “Analysis on the Effect of Input Impact Profiles in Drop Test,” Master Thesis, ÃÛÌÒÊÓƵ University, December 2007
• Marconi Adhikari, “Web-based GUI Analytical Modeling and Simulation of Dynamic Systems,” Master Thesis, ÃÛÌÒÊÓƵ University, December 2007
• Sharan C. Kallolimath, “Dynamic Response of a Portable Electronic Product Subjected to an Impact Load,” Master Thesis, ÃÛÌÒÊÓƵ University, Beaumont, TX, May 2006
• Sachin P. Lahoti, “Investigation of Inner-layer Dielectric (ILD) Failure by Hygroscopic Swelling,” Master Thesis, ÃÛÌÒÊÓƵ University, Beaumont, TX, December 2005